Unfortunately, the camera broke, so here is a picture from a prior year, but we did more vacuum demonstrations for kids at the 2015 Engineering Open House on Mar. 13. Thank you to all who were able to help out!
On Oct. 25, the University of Illinois AVS Student Chapter taught ~ 15 4th and 5th grade boys of the St. Elmo Brady STEM academy about vacuum science. The St. Elmo Brady STEM academy gives African-American 4th and 5th grade boys hands-on exposure to science, technology, engineering and mathematics. We showed them what happens to a ringing alarm clock, the speed at which a feather and magnet fall, Peeps, shaving cream, a candle, a balloon, and water in a vacuum and helped them to discover why these materials behave the way that they do in a vacuum.
On Wednesday, Sept. 17, Drs. Kuznetsova and Grebennikov discussed their investigations into topological insulators using angle-resolved photoelectron spectroscpoy (ARPES) and scanning tunneling microscopy/spectroscopy (STM/STS).
Bismuth tellurohalides including BiTeI belong to a family of layered polar semiconductors lacking inversion symmetry. Much attention has recently been paid to these compounds due to the strong spin-orbit interactions of electrons caused by Bi atoms. The strong correlation between the direction of motion and spin of charge carriers (called the Rashba splitting) in materials without spatial inversion can be used in spintronic devices. The Rashba effect leads to a shift of opposite spin-polarized bands in opposite directions on the momentum scale. In the semiconductor BiTeI, the Rashba effect can be used to control the spin of charge carriers using electric fields providing a pathway for the technological development of spintronic devices.
The near surface layer of BiTeI has been converted to the three-dimensional topological insulator state by doping the surface with Cs. We studied this system by angle-resolved photoelectron spectroscopy (ARPES) and scanning tunneling spectroscopy. We analyzed the electronic structure of the (0001) surface of BiTeI and its modification upon adsorption of Cs using ARPES. A strong shift of the electronic states at the (0001) BiTeI surface by several hundred meV to higher binding energies due to band bending effects as well as the Rashba splitting are observed. Both scanning tunneling microscopy (STM) and spectroscopy (STS) show unusual atomic structures of the surfaces terminated by both tellurium and iodine atoms. Our experiments have shown that the relaxation of the surface atoms in these compounds is significant and can be used to control surface states in topological insulators.
On Tues. Sept 16, 2014, Dr. Yakushev was able to teach us about the capabilities of optical spectroscopy including photoluminescence by describing his work with chalcopyrites and other semiconductors.
The past couple of years have marked the centennial anniversary of x-ray crystallography – a field of research that has seen a tremendous growth ever since its birth. Rather than going out of fashion eventually, it has helped to push the boundaries of our understanding of matter and materials steadily further. New x-ray techniques are continuously added to our set of available research tools, while established methods of crystallograpy are reaching new frontiers by taking advantage of the latest instrumentation developments.
The exploration of reciprocal space has taken a leap in terms of speed, accuracy, reliability, and the obtainable level of detail with the advent of modern single-photon-counting x-ray area detectors featuring high frame rates and zero readout noise. Each detector image represents a 2-dimensional slice through reciprocal space, and a single diffractometer scan extends this to a stack of slices probing a 3-dimensional volume. This allows for the rapid characterization of large volumes of reciprocal space, revealing all of the structural phases and their orientations present in a sample. The method is particularly powerful if not all the constituent phases and the corresponding locations of their diffraction signals are known, and aids in the discovery of unexpected phenomena or crystal structures.
In this talk, Christian gave a basic tutorial on how to navigate in reciprocal space and showed how to use a Pilatus 100K pixel detector to collect large volume data sets, which could then be processed to yield 3-dimensional reciprocal space maps (RSMs), high-quality powder diffraction data, or simultaneous measurements of pole figures for a whole range of 2-theta values. The capabilities of this approach were then highlighted using several topical research examples: The detailed investigation of the domain structure of multiferroic bismuth ferrite (BiFeO3) thin films and its phase transitions with temperature and film thickness was only possible due to the rapid collection of many RSMs, including those around the half-order film Bragg Peaks, which contain sensitive information about the oxygen octahedra rotation patterns in this material. Iron oxide (Fe2O3), as another example, is an attractive material for the photoelectrochemical (PEC) oxidation of water, particularly when it is heteroepitaxially grown on the facets of indium tin oxide (ITO) nanowires to form a core-shell structure with a large catalytic surface area, long optical absoption paths, and short charge transfer pathways. Simultaneous pole figure measurements of the ITO and Fe2O3 diffraction signals help to reveal the epitaxial relationship at the interface between the ITO nanowire facets and the Fe2O3 layer and provide information which can ultimately be used to guide the design and optimization of future PEC devices.
UIUC AVS had a booth “Peeps in Spaaaaace” at Engineering Open House on Mar. 14-15, 2014.
Vacuums are more than your trusty Hoover! They are used in a wide variety of industries and can be used to illustrate many important physical concepts, such as pressure, phase changes, and acoustics. Have you ever wondered what would happen to a balloon in a vacuum? Could you hear an explosion in space? What happens to fire in the vacuum of space? Can you get a fireball in space? How can you get ice to crystallize at room temperature? What happens when you put Peeps and shaving cream in a vacuum?
Thank you to all who helped to man the booth!
Professor Jasprit Singh from the Department of Electrical Engineering and Computer Science at the University of Michigan, Ann-Arbor, discussed how technology can be used to bring harmony to our lives. In today’s age of “knowledge abundance” a key challenge is to bring harmony between knowledge and action. Our modern age may be called the age of mindfulness where lack of mindfulness is reflected in the gap between resources, knowledge and action. Human consumption has never been higher but more than a third of human actions worldwide are taken to undo our previous actions. This represents the “Carnot efficiency” of modern life. The obesity crisis, the environmental crisis as well as global economic crisis are not primarily due to a lack of knowledge or resources but due to our inability to act on what we know and want.
What role can technology play to harmonize what we know, what we want and what we do? What kinds of sensors and devices are needed for making this happen? In this talk I will describe some of the potential roles technology can play in acting as a “mentor” in our life. In particular I will describe our work on mobile “mentor platforms” and describe the potential role of new materials and sensors that could be integrated in mobile or wearable devices.
Semiconductor quantum dot lasers have been extensively studied for applications in future lightwave telecommunications systems. Prof. Coleman described the growth, processing and characteristics of quantum dot and nanostructure lasers that exhibit interesting and potentially important effects arising from reduction of the active medium to the quantum regime (<50 nm) in all three dimensions. The motivation for quantum dots in lasers was outlined along with methods for forming self-assembled and patterned quantum dots. The resultant laser characteristics was presented. Prof. Coleman introduced a novel inverted quantum dot structure or nanopore laser, containing three dimensional quantization formed from an engineered periodicity.
Two-day vacuum workshop on April 17th and 18th 2012 from 11:00-1:00 pm in MRL 280!
Do you work with vacuum systems?
PLD? MBE? CVD? ALD? Sputtering?
Ever wonder how to build a vacuum chamber?
Ever wonder why your base pressure is too high?
Ever wonder what materials are vacuum compatible?
Ever wonder how to use a leak detector?
These are some of the questions we will be addressing at our two day vacuum workshop on April 17th and 18th from 11:00-1:00 pm in MRL 280!
The full list of topics are: gas and surface physics, vacuum technology, industry standards, component design and fabrication, system operation and safety.
Lunch will be provided.
To attend pre-register with the form at the bottom of this page. (Registration is now closed.)
Hosted by UIUC AVS Student Chapter. Presented by A&N Coorporation (http://www.ancorp.com/).